2 TON FOLDABLE ENGINE CRANE
Jackaroo Adjustable Beam 2 TON FOLDABLE ENGINE CRANE with 4 Various Lifting Rate, 500 .1000, 1500, 2000 Kg
Features & benefits:
- Heavy-gauge welded construction with rugged square tubular steel.
- Swivel casters for easy maneuvering and positioning.
- 8 Ton Hydraulic long Ram with built-in by-pass system prevents ram from being over-extended.
|Product Size||1745*850*1460 MM|
|Lifting Rate||(240 mm) 1840mm|
The Engine Crane (also referred as engine hoist) is a common repair tool used in vehicle repair shops to remove or install gasoline or diesel engines in small and crowded vehicle engine compartments. It uses a heavy cantilevered support structure to hold the engine in mid-air so that the mechanic can carefully connect or disconnect fragile hoses and wires on the engine to the frame of the vehicle.
Pro workshop Gear as a direct importer of mechanical workshop equipment provide a whole range of general workshop Equipment such as Engine Crane. Why Don’t you check out our full range of workshop general product.
How to Use:
Turn the handle/release valve clockwise to the closed position.
Identify the maximum amount of load able to be lifted based off of boom position.
Ensure that the product being lifted can safely be lifted by this product.
Secure the load to the crane and ensure that the load is a centered as possible.
Before moving the load, ensure that the load is at the lowest practical position and ensuring that the load is below the center of gravity of the unit.
Ensure that the load cannot swing while being moved. This can cause serious injury and/or property damage.
Once the engine has been secured to an appropriated device, turn the handle/release valve slowly counter-clockwise to lower the crane boom until the engine is no longer supported by the Engine crane.
Disconnect all of the crane fasteners secured to the engine and carefully pull the Engine Crane away from the engine.
Use high grade hydraulic oil only. Never use brake fluid, motor oil, transmission fluid, turbine oil or any other fluids. ISO-VG22 or equivalent hydraulic oil is recommended.